Suitable for most situations, excels in difficult Back-Lit & High-Contrast areas.

This Security Camera is perfect for monitoring & recording, versatile variable focal length Lens allows 25+ m wide shots @ 15 m or Tight 1.2 m wide shots @ 3 metres.

Suitable for Offices, Warehouses, Homes, Factories, Showrooms, sheltered Outdoor use (under eaves) & Total-Darkness with illumination provided by the inbuilt Infrared Illuminator.

Use out-of-the-box or use the easy On-Screen Setup menu & 5-way push-button Joystick to tailor parameters to cope with problem situations.

Better than a Dome No washed out low contrast images caused by IR-Lens leak-through.

Long IR Range Pixim Seawolf Security Camera

 
Security Camera with new DPS Imager technology that solves many of the shortcomings of conventional CCD and CMOS sensors, this Pixim Seawolf Solution is ideal for most common and many difficult Security Surveillance applications.

Specifically designed for surveillance in domestic and commercial situations this Security Camera can be easily added to an existing Security Recording system (or replace an under performing CCD Camera), simply connect Video Output from Camera to an unused Security DVR Video input.

This Security Camera can be easily connected to the Composite Video Input (AV, Yellow RCA socket) on most TVs and Domestic or commercial Recording Devices, if required a Microphone can be easily added and a single small diameter Cable used to carry Video, Audio & Power 20 or more metres.

Powered by Pixim's 'Seawolf Solution' this Security Camera has an extraordinary 690 HTVL effective resolution, this is far better than conventional Security Cameras, HTVL Effective Specification.

Better than a Dome separation between Lens and LED glass eliminates transmission of infrared from LED to Lens that with a one-piece Dome results in a washed out image and a reduction in contrast, also eliminated are internal reflections caused by light entering from behind and sides, these problems cannot be resolved with a conventional one-piece Dome.

Video System: 2:1 Interlace switchable between PAL 50/625 or NTSC 60/525. PAL 50 Hz vertical, 15 625 Hz horizontal. Compatible with TV Systems in Australia, NZ, UK, USA, Japan, etc.

Video Output: Composite Video 75 ohms 1.14 V p-p, BNC socket on ~ 70 cm cable, suitable for TV, DVR, VCR, AV & Video inputs in Australia, NZ, UK, USA, Japan, etc.

Automatic Electronic Shutter (AES): 1/25 to 1/30 720 second.

Dynamic Range (more): 102 dB typically, 120 dB maximum, Dynamic Range is illustrated on this page.

Smear (more): Zero for most practical purposes, copes with highlights better than ordinary CCD cameras, Smear is illustrated on this page.

Spectral Response: ~ 400 to ~ 1100 nm with Infrared 'CUT' Filter 'out' of optical path.

Signal to Noise ratio (SNR): up to 50 dB, measured with AGC off.

Back Light Compensation (BLC): Automatic, On/Off.

Noise Reduction: 3D, Motion Adaptive.

Flicker Reduction: 'Pixim' Enhanced Flicker Reduction.

Gamma: 0.45.

Infrared Illuminator: 18 Light Emitting Diodes (LED) ~ 850 nm wavelength Infrared, these produce a dull Red visible glow and switch On/Off depending on illumination level. Depending on Lens 'focal length' setting LEDs illuminate up to ~ 80% of the Width-of-Vision at up to ~ 15 m depending on the Infrared reflective characteristics of subject. Objects closer than ~ 2 metres may be overexposed when illuminated by LEDs.

IR-CUT motorised movable Infrared Cut Filter: Yes, details below.

*Day/Night setting = Automatic:
more
In Day mode (well lit, colour) mechanism automatically positions IR-CUT optical filter between Lens and Image Sensor to exclude Infrared radiation that would otherwise adversely affect colour reproduction, this ensures colour rendition not possible with ordinary non-filtered or notch-filter type Day/Night cameras.

In Night mode (low light, monochrome) mechanism automatically removes IR-CUT optical filter to allow Infrared radiation to pass boosting low light and Infrared sensitivity, the result is significantly better night images using inbuilt Infrared Illuminator or with Infrared rich light sources. Infrared Response without Infrared filter is ~ 700 to ~ 1100 nm better than a 'Security Camera notch IR Filter', additional Security Camera Infrared Night Vision information.

On-Screen-Display Setup: All menu functions and parameters are easily set via Up/Down/Left/Right/Enter push button 'Joystick' (pictured below) moulded into Camera Power & Video cable.

Camera Setup: Due to ongoing product development all or some of the functions listed below may not be available with this Camera.

To Access Press & Hold Enter
"WDR Control" Low / Normal / Medium / High / Presets.
"BLC" Off / On.
"White Balance" ATW / AWB
"AGC" Low / Normal / High
"Lens Select" Manual / DC.
"Fluorescent" Off / CRR.
"D/N Control" Off / Auto / GPIO.
Save & Exit / Reset Camera to Default settings / Cancel changes.
 
We suggest using Default settings with small changes to WDR, BLC, White Balance, AGC & Fluorescent as/if required.

Advanced Menu 'for specialists': Not recommended for regular users & not supported.

To Access Press Left, Right, Left, Right & Down.
"Presets" Vivid / WD_Normal / Normal.
"Exposure" 50i, 25p.
"AGC" Custom Bias -18 to 18 / Limit 0 to 60.
"Range Ctrl" Low / Normal / Medium / High / Custom Bias -30 to 30 / Limit 0 to 36.
"Exposure Pref" Highlights / Shadows.
"Shutter Mode" Off / Auto / Manual Shutter Limit 2X -25FPS, 4X-12FPS, 8X-6FPS, 16X-3FPS, 32X-1FPS, 64X-1FPS.
"Meter Method" Median / Mean.
"Gain Mode: AGC / Manual -48 to 60.
"Range Mode" Auto / Manual 0 to 30.
"Transitions" Presets Slow / Norm / Fast. Exposure Transitions - Filter 0 to 4000, Hyst 0 to 4000, Trans 0 to 4000. Range Transitions - Filter 0 to 4000, Hyst 0 to 4000, Trans 0 to 4000.
"White Balance" Mode - ATW Xtnd / ATW Normal / ATW Desat / AWB / Manual Adj Mode Kelvin / R/B. Meter Method Mean / Median.
"Viewing" PTZ - Zoom 1 to 4, Pan -100 to 100, Tilt -100 to 100, Flip - Off / Horiz / Vert / Both. Render Intent - Movie / Info. Privacy Mask Setup - Off / Colour White-Black-Red. ID Display - On / Off. ID Position - Up-Left, Up-Center, Up-Right, Down-Left, Down Right.
"Setup" Most of the parameters except Video Standard PAL / NTSC & Video IRE Level may not be relevant to this camera.

Power Requirements: Power Requirements: 12 Volts DC Regulated or 24 vac, ~ 2.5 Watts LEDs Off, ~ 4.5 Watts LEDS On, via ~ 70 cm stripped & tinned wires Red = (+). Consider cable resistance when installing, ask us about solutions if voltage drop is a problem with existing wiring.

Dimensions (mm): ~  130 x 60 x 65.

Mass: ~  700 grams.

Manufacturer: 18+ years experience. ISO 9001, CE, FCC, RoHS certification. OEM & ODM supplier.

Made in China.